Customized Shaped Double Side Vacuum Forming Wall-mounted Light Box
Product information:
Customized aluminum frame LED vacuum forming light box for outdoor using
Frame:
Adopting the flexible aluminum frame which is a metabolic and wearable. The face will be bright sandblasting treatment which looks fashionable. There are 2 styles for choosing, one is no any lines just smooth surface, the other is personalized that is with lines on the surface.
Feet
Iron bracket feet which is special for light box. The installation will be easy and stable.
Acrylic sheet
High quality acrylic sheet waterproof, durable and with good light transmission. There are many colors for choosing.
Technology
thermoform, mould sucking
Vacuum forming progress
Step1. Make the plastic sheet be clamped into position which above the
vacuum forming mold inside the vacuum forming machine.
Step 2
The sheet is then heated by two heaters one above the sheet and one below the sheet.
This method is called sandwich heating and gives a more consistent temperature
throughout the sheet avoiding any cold areas which in turn gives you a sharper and
more defined vacuum forming .
Step 3
Once the sheet is heated to the correct temperature it will become pliable, the
vacuum forming mold is raised and a vacuum is applied which pulls the now
malleable plastic sheet down onto the vacuum forming mold.
Step 4
The vacuum is kept on while the plastic is cooled using large fans and water spray so
that it retains the shape off the vacuum forming mold.
Step 5
Once the plastic is cooled the vacuum is released and the plastic part removed by
gently applying a short blast of air between the vacuum forming mold and the plastic
component.
Step 6
Pick the plastic sheet which is finished vacuum forming out from the vacuum forming
machine.
Step 7
Cut the edge by CNC machine or hand.
Step 8
Cleaning and packing.
Strengths:
1. Vacuum forming which can make light boxes in any shape, no need high mold cost. |
2. Indoor or outdoor use. Installed on the wall or hanging on the ceiling. |
3. Vacuum sucking model with 3D effect. |
4. High quality imported acrylic PMMA front panel. |
5. Not easy to fade or distort, against to hot weather and strong UV. |
6. Long life-span LED Lighting, at least 50,000 hours |
7. Easy to install and clean. |
8. Resistant to pressure, strike, water, snow, acid, alkali etc. |
9. Environmental-protection, energy saving. |
Specifications:
Product Name: |
Light box |
Brand: |
Weldon |
Product Application: |
Business center, supermarket, chain stores, etc |
Material: |
Aluminum, acrylic,iron |
Size: |
customized |
Features: |
Display any logos |
Light Source: |
LED module/tube option |
Frequency: |
50-60HZ |
Printing type: |
Anti-UV/silk screen |
Light Distance: |
0-5m |
Power Type: |
transformer |
Shape: |
Any shape |